Table of Contents
Advertisement
Read this section to learn how to connect and configure the equipment of the M6
system.
Formatting the Mx computer - SDS-0-01
You need to format the Mx computer according to the type of system it will be used
with. Follow this procedure only if you have a Mx computer computer with the product
number SDS-0-01.
You need the following items:
• A system USB key (M4 or M6, 2019-09)
• A screen with VGA or HDMI cable
• A keyboard with QWERTY layout
Marport offices only.
Tip: If you are not sure of the Mx computer model that you have, see
Equipment List (on page 13).
1. Only connect the screen and keyboard to the Mx computer.
2. Plug in the system USB key.
3. Press
to switch on the Mx computer.
Installation
M6 PRO | V7 | Installation
61
Advertisement
Table of Contents
Troubleshooting
