Automatically Opening Scala2 And Teamviewer; At Start Up - Marport PRO M6 Service Manual

c. In the terminal, enter
MosaPatchForMavericks.sh
d. When prompted, enter the administrator password.
e. Close the terminal.
f. Open Mosa2 and check if the script has worked. If Mosa2 does not open, it
means the script has not worked. Repeat the procedure and make sure you
enter the correct command line.
Automatically Opening Scala2 and TeamViewer at Start Up
Scala2 and TeamViewer must open automatically when the computer is turned on. To
do this, apply the following settings in the system preferences.
sh /Volumes/Marport-Mosa2/
M6 PRO | V7 | Computer Configuration
49