Receiver - Marport PRO M6 Service Manual

Product
Name
reference
NC-1-09 ‡ Active hydrophone
(integrated pream­
plifier)
*Note that cables are colored according to the type of hydrophone: blue for passive,
green for active narrowband and yellow for active wideband.
† Standard active hydrophones have an available bandwidth of 6kHz. So, if:
(PRP_number * 100) + (NBTE_number * 800) < 6000 you have enough place. If:
(PRP_number * 100) + (NBTE_number * 800) > 6000 then you need a wideband
hydrophone.
‡ Add as NC-1-07 in the system web page.
Connecting the Hydrophone to the Receiver
You need to connect the hydrophone to the receiver to be able to display sensor data
received by the hydrophones.
Use case
• For use on a para­
41-44 KHz
vane only
• Vessel with normal
level of noise (below
-100 dBV).
• Limited number of
sensors.†
• No filtering options.
• Not used for posi­
tioning system
M6 PRO | V7 | Installation
Band­ Typical cur­
width rent con­
(3 dB) sumption
4-6 mA
Cable*
Blue,
heavy-
duty
92