The Mx Receiver Does Not Appear On Mosa2; In Scala2 - Marport PRO M6 Service Manual

The Mx receiver does not appear on Mosa2 discovery
page and the system is not displayed in Scala2
The IP addresses of the Mx computer and Mac computer are not on the same
subnet.
In order to communicate between each other, and be detected by Mosa2, the IP
addresses of both computers need to be on the same subnet. By default, the IP address
of the Mx computer is 192.168.1.170. If the Mac computer is on a different subnet, for
example 192.168.10.XXX, Mosa2 will not detect the Mx computer.
See Configuring Mac Mini Network (on page 75) to know how to change the Mac mini
network settings.
The system installation on the Mx computer was not done or not properly
completed.
1. Connect a screen to the Display port on the Mx computer.
2. If the screen does not display the command line debian login:_ it means that the
system is not installed on the Mx computer.
3. See Formatting the Mx computer - SDS-0-01 (on page 61) or Formatting
the Mx computer - SDS-0-02 (on page 65), according to the model of the Mx
computer.
M6 PRO | V7 | Maintenance and Troubleshooting
105