Creating An Adc Tenant Database - Mircom TAS-2000 Series User Manual

Creating an ADC Tenant Database

Note:
The name of the file that is opened displays across the top of the Control
Panel window. To enter tenant names click "Show ADC". The following window
displays.
Records may be added, edited or deleted as desired. To add records, click the
"ADD" button. The following window displays.
• Enter resident name if using scrolling directory panels, or leave blank if
using non-scrolling panels
• Enter resident apartment number (this is optional because it is used for
reference only--it will not be stored on lobby panel)
• Enter 4-digit resident dial code (for dial codes fewer than 4 digits, precede
with 0's, e.g. 0003)
• Enter resident telephone number (maximum 14 digits)
If your lobby panel is configured as a Non-Subscriber Line
(NSL), skip to Creating an NSL Tenant Database on page 5.
TAS-2000 MSW-003 Software Manual
3