Opening/Creating A Job File - Mircom TAS-2000 Series User Manual

Opening/creating A Job File

Opening/creating A Job File
1. Open the TAS-2000 software by clicking Start->Programs->TAS 2000.
You will be prompted for a User Name and Password (as shown below).
The default for both is "mircom".
2. Type "mircom" in both spaces and click OK
Note:
The Control Panel window displays.
3. Click "Open Job File" located in the upper left on Control Panel window.
The following window displays.
4. Select an existing file from the list or type a new file name in the File
name window.
5. Click Open.
2
"mircom" must be type in all lower case letters.
.