SEALED BURNER
When a main burner control knob q is turned
to the "lite" position, the gas valve r opens,
and gas flows through the gas distribution
valve s into the manifold t through the open
valve. As gas passes through the valve and its
orifice, it is directed into the venturi u, where it
mixes with primary air to create the proper
mixture necessary for combustion.
GAS DISTRIBUTION
VALVE
3
GAS INLET
THEORY OF OPERATION
ELECTRONIC IGNITION SYSTEM
IGNITION SWITCH
4
GAS
MANIFOLD
At the same time, line voltage is applied through
the ignition switch v, to the spark module w,
which produces high-voltage, low amperage
pulses to all of the spark ignitors x. The pulses
cause a spark y to occur between the spark
ignitor electrode, and the grounded burner
cap z. The gas and air mixture at the burner is
ignited by the spark, and a flame is produced at
each of the top burner ports.
120 VAC
LINE VOLTAGE
TO SPARK
IGNITOR
6
2
5
GAS VALVE
AIR SHUTTER
OFF
1
BURNER
CONTROL
KNOB
3-1
SPARK
7
MODULE
BURNER CAP
10
BURNER FLAME
VENTURI
9
SPARK
SPARK
IGNITOR
8
BURNER