Removing The Gas Distribution And Safety Valves - KitchenAid KGST300 Technical Education

REMOVING THE GAS DISTRIBUTION AND SAFETY VALVES

WARNING
Electrical Shock Hazard
Disconnect power before
servicing.
Replace all parts and panels
before operating.
Failure to do so can result in
death or electrical shock.
Shut off gas supply line valve
before servicing.
Check all gas line connec-
tions and replace all parts
and panels before operating.
Failure to do so can result in
explosion, fire or other injury.
1. Turn off gas supply and disconnect power
to the range.
2. Remove the storage drawer.
Storage Drawer
Gas Distribution Valve
Fire Hazard
Safety Valve
3. From inside the storage drawer area, dis-
connect the bake and broil wires from the
safety valve.
4. Disconnect the gas lines from the gas
distribution and safety valves.
Gas Distribution Valve Line
Broil Safety Valve Wires
5. Remove the mounting screws from the
gas distribution and safety valves. NOTE:
The gas distribution and safety valves are
replaced as an assembly. They are not
intended to be replaced separately.
Safety Valve Screws
(Viewed From The Rear Of The Unit)
4-21
Bake Safety Valve Wires
Safety Valve Gas Line
Gas Distribution
Valve Screw