Removing The Bake Burner & Ignitor - KitchenAid KGST300 Technical Education

REMOVING THE BAKE BURNER & IGNITOR
WARNING
Electrical Shock Hazard
Disconnect power before
servicing.
Replace all parts and panels
before operating.
Failure to do so can result in
death or electrical shock.
Shut off gas supply line valve
before servicing.
Check all gas line connec-
tions and replace all parts
and panels before operating.
Failure to do so can result in
explosion, fire or other injury.
1. Turn off gas supply and disconnect power
to the range.
2. Remove the storage drawer from the unit.
3. Open the oven door and remove the racks
from inside the oven.
4. Remove the four screws from the bake
burner cover and lift the cover off the flame
spreader.
2 Screws
Bake Burner Cover
Fire Hazard
2 Screws
5. Remove the four screws from the flame
spreader and remove the spreader.
2 Screws
6. To remove the bake burner:
a) Remove the two screws from the bake
burner ignitor bracket, and remove the
bracket and ignitor from the burner.
Bake Burner Ignitor Bracket Screws
4-18
Flame Spreader
Bake Burner
2 Screws