REMOVING THE OVEN DOOR GASKET
WARNING
Electrical Shock Hazard
Disconnect power before
servicing.
Replace all parts and panels
before operating.
Failure to do so can result in
death or electrical shock.
Shut off gas supply line valve
before servicing.
Check all gas line connec-
tions and replace all parts
and panels before operating.
Failure to do so can result in
explosion, fire or other injury.
1.
Turn off gas supply and disconnect power
to the range.
2.
Pull the range out of its mounting location
so that you can access the rear of the unit.
3.
Loosen the two oven liner screws so that
the inside of the hex-head skirt is approxi-
mately 1/2" from the chassis.
2 Oven Liner Screws
Fire Hazard
4.
Pull the oven liner forward to loosen the
oven door gasket from the front of the unit.
5.
Starting at one end, pull the gasket out of
the liner hole, and remove it from around
the liner and the second hole.
Pull Oven Liner Forward
To Release Gasket
Pull Door Gasket Out Of Hole
And Remove From Liner
REASSEMBLY NOTE: After the door gasket is
installed, make sure that it is even along the
surface of the door when the door is closed.
4-29