Refrigerant Circuit; Manufacturer Components; Checking Procedures; Repair Procedures - Daikin Sky Air FAA71BUV1B Service Manual

5.2 Refrigerant circuit

5.3 Manufacturer components

5.3.1 Checking procedures

To check the correct operation / setting of the manufacturer component

5.3.2 Repair procedures

To adjust the manufacturer component
FAA71+100BUV1B
Sky Air indoor units
ESIE22-01 – 2022.02
1 Make sure that all wires are firmly and correctly connected, see
4
diagram" [ 93].
2 Check the continuity of all wires.
3 Replace any damaged or broken wires.
INFORMATION
If applicable, also check the electrical components between the main power supply
terminal and the indoor unit power supply terminal (e.g. intermediate terminal, noise
filter, fuse, ...).
Is the problem solved?
Yes
No
INFORMATION
Depending on the combination between the indoor unit and outdoor unit, these
procedures may differ. See the service manual of the appropriate outdoor unit for
the correct procedures.
1 See the specific dealer manual to check for the correct installation, operation
or setting of your component.
Does the component function
correctly?
Yes
No
1 See the specific dealer manual to adjust your component.
Is the problem solved?
Yes
5 Third party components
|
Action
No further actions required.
Return to the troubleshooting of the
specific error and continue with the
next procedure.
Action
Return to the troubleshooting of the
specific error and continue with the
next procedure.
Adjust the specific component, see
"5.3.2 Repair procedures" [
Action
No further actions required.
"7.2 Wiring
4
87].
Service manual
87