4
|
Components
4.6.6 To re-install the front grille
4.6.7 To re-install the front panel
4.7 Remote controller user interface
4.7.1 Checking procedures
To check the correct functioning of the remote controller user interface
Service manual
66
9 Connect the transmission wiring to the wiring terminal X1M.
1 Install the front grille and firmly engage the upper hooks (3 for class 71, 4 for
class 100).
2 Install the screws back (3 for class 71, 6 for class 100).
3 For class 100, re-install grille clamps and install the 3 screw covers (accessory).
4 Re-install front panel, see
1 To attach the front panel, align the hooks of the front panel with the slots and
push them all the way in.
2 Close the front panel slowly.
INFORMATION
It is recommended to perform the checks in the listed order.
1 Check the display for the following items:
4
"4.6 Plate
work" [
60].
FAA71+100BUV1B
Sky Air indoor units
ESIE22-01 – 2022.02