GWP value of the refrigerant × Total refrigerant structions. charge [in kg] / 1000 Thank you for purchasing this Daikin air conditioner. Carefully read this operation manual before using 1. SAFETY PRECAUTIONS the air conditioner. It will tell you how to use the unit properly and help you if any trouble occurs.
Page 3
• Consult your local dealer regarding cleaning the inside After reading, keep this manual in a convenient place so of the air conditioner. that you can refer to it whenever necessary. If the equip- Improper cleaning may cause breakage of plastic parts, ment is transferred to a new user, be sure also to hand water leakage and other damage as well as electric shocks.
Page 4
Do not place objects in direct proximity of the outdoor Do not install the air conditioner at any place where unit and do not let leaves and other debris accumulate there is a danger of flammable gas leakage. around the unit. In the event of a gas leakage, build-up of gas near the air Leaves are a hotbed for small animals which can enter the conditioner may result in a fire.
DRY, and FAN OPERATION modes. This operation manual is for the following systems with standard control. Before initiating operation, PRECAUTIONS FOR GROUP CONTROL contact your Daikin dealer for the operation that cor- SYSTEM OR TWO REMOTE CONTROLLER responds to your system. CONTROL SYSTEM...
3. OPERATION RANGE NAMES AND FUNCTIONS OF PARTS If the temperature or the humidity is beyond the fol- lowing conditions, safety devices may work and the air conditioner may not operate, or sometimes, water may drop from the indoor unit. COOLING [°C] INDOOR...
4. INSTALLATION SITE 5. OPERATION PROCEDURE Regarding places for installation Read the operation manual that came with the remote controller. • Is the air conditioner installed at a well-venti- lated place where there are no obstacles • To protect the unit, turn on the main power switch around? 6 hours before operation.
Page 8
AT THE START OF OPERATION AND AFTER • When the indoor temperature exceeds the set DEFROST OPERATION temperature, the air conditioner discharges a gentle breeze (switches to whisper mode). The air • A warm air circulating system is employed, and discharge direction becomes horizontal.
Page 9
A. UP AND DOWN DIRECTION Recommended flap positions Press the AIRFLOW DIRECTION ADJUST button to select the air direction as following. Cooling The AIRFLOW DIRECTION display swings as shown the left and the airflow direction continuously varies. (Auto- Heating swing matic swing setting) Press AIRFLOW DIRECTION We recommend using the airflow in the position...
7. OPTIMUM OPERATION 8. MAINTENANCE (FOR SERVICE PERSONNEL) Observe the following precautions to ensure the system operates. ONLY A QUALIFIED SERVICE PERSON IS • Prevent direct sunlight from entering a room ALLOWED TO PERFORM MAINTENANCE during COOLING OPERATION by using curtains WARNING or blinds.
Page 11
1. Open the front panel. HOW TO CLEAN AIR INLET, AIR OUTLET, EXTERIOR, AND REMOTE CONTROLLER Place your fingers on the panel protrusions on the left and right sides of the main unit and open • Wipe with a soft dry cloth. until the panel stops.
4. Attach the front panel. WHAT TO DO TO STOP THE SYSTEM FOR A Set the hooks of the front panel into the slots and LONG PERIOD push them in all the way. • This will prevent generation of mould. Close the front panel slowly in this state.
Page 13
• HEATING OPERATION within 6 hours after When the room temperature exceeds the set temperature the indoor unit goes into whisper the power is supplied to the air conditioner. mode. It takes some time until the airflow rate Some models perform the following operation to changes.
Page 14
For details, contact your Daikin dealer. room becomes uneven. It is necessary to clean the inside of the indoor unit. Ask your Daikin XI. THE UNIT DOES NOT COOL EFFECTIVELY. • The unit is operating in program dry mode.
If one of the following malfunctions occurs, take Remove the obstacle and make it well-venti- the measures shown below and contact your lated. Daikin dealer. Obstacles decrease the airflow rate, and cause performance decrease and breakage The system must be repaired by a qualified service when discharged air is suctioned.
Menu/Enter button. •The error code blinks and the contact Error Code:A1 address and model name will appear. Contact Info •Notify your Daikin dealer of the Error code 0123 – 4567 – 8900 and Model name. ––– /000 Indoor Model –––...
Need help?
Do you have a question about the FAA71AUVEB and is the answer not in the manual?
Questions and answers