Daikin Sky Air FAA71BUV1B Service Manual page 72

4 | Components
To install the swing flap motor
Service manual
72
a
A
A FAA71B unit
B FAA100B unit
a Screw
b Swing flap motor
3 Remove the swing flap motor from the coupling piece.
4 Disconnect the connector from the swing flap motor.
5 To install the swing flap motor, see
INFORMATION
For class 100 units: Main and secondary swing flap motor come as 1 spare part.
1 Connect the wiring harness to the swing flap motor.
2 Install the swing flap motor in the correct location on the indoor unit. Make
sure the swing flap motor shaft is correctly inserted in the coupling piece. For
class 100: make sure the secondary swing flap motor is also installed correctly.
a
A
A FAA71B unit
B FAA100B unit
a Screw
b Swing flap motor
3 Install and tighten the screw (class 71) or 3 screws (class 100) to fix the swing
flap motor.
4 Install both swing flaps in the indoor unit (by clicking it on).
Is the problem solved?
Yes
b a a b
B
a
"Repair
b a a b
B
a
Action
No further actions required.
4
procedures" [ 71].
Sky Air indoor units
ESIE22-01 – 2022.02
FAA71+100BUV1B