ICP DAS USA ZT-2005-C8 User Manual page 60

for DCON commands or the section 5.3.7 and 5.3.9 for Modbus RTU commands.
In addition, we also can use DCON Utility to set the Address parameter for the
more values of 1 to 247.
Finally, we only turn the Address of DIP and rotary switches to address 0 and
reboot module, the software address will be enabled. The default software
address is 0x01.
ICP DAS, ZT-2005-C8 User Manual, Version v1.0.1 Page 60
Copyright © 2014 by ICP DAS Co., Ltd. All Rights Reserved.