Summary of Contents for ICP DAS USA ZT-20 IOG Series
Page 1
ZT‐20xx‐IOG SERIES Quick Start What’s in the Shipping Package? The shipping package contains the following items: ZT‐20xx‐IOG Module ANT‐124‐05 Quick Start If any of these items are missing or damaged, please contact your local distributor for more information. Save the shipping materials and cartons in case you need to ship the module in the future. ...
Page 2
Hardware Basic Setting 1. Hardware Setting Interface ZT-2043-IOG ZT-2053-IOG ZT-2055-IOG 9 10 11 12 RF Channel Node ID Reserved ZT-2060-IOG Basic Setting Parameters for Hardware ① DIP 1 : Module Initial Mode For normal operation, set the DIP_1 to the RUN position. ...
Page 3
② DIP 2 : DI Event trigger mode or way The event trigger modes of the ZT-IOG system, the same are the trigger ways for the DI channel of the ZT-IOG module. Users is able to choose the suitable mode via refering user manual for detail descriptions.
Page 5
Software Advanced Setting 1. Advanced Setting Parameters for Software The following items are the main functions and configurations to the software advanced setting, please refer the user manual for more information. http://ftp.icpdas.com.tw/pub/cd/usbcd/napdos/zigbee/zt_series/document/zt-iog/ Disconnection Detection : Safe Value (Router), Check-Router-Alive (Coordinator) I/O Channel Pair Relationship : Channel Offset (DI/DO) Other Parameters : Pan ID, RF Power, Refresh Interval...
Page 6
can call the software utility. Execute the ZT-20xx-IOG Configuration Utility (Windows Based): ⑤ Use “ZT-IOG Series Configuration Utility” to connect the ZT-20xx-IOG. ⑥ a. Click【COM Port Setting】to select the COM port of the ZigBee converter. b. Click【Read Setting】to read the current settings of the ZT-20xx-IOG module. After reading the settings, directly set the parameters in “New”...
Wiring Connection Model Input Type ON State Readback as 1 OFF State Readback as 0 Relay ON Relay OFF Dry Contact Voltage > 3.5 V Voltage < 1 V Wet Contact (Source) Open Collector ON Open Collector OFF Wet Contact (Sink) Close to GND Open...
Output Model ON State Readback as 1 OFF State Readback as 0 Type Drive Relay Resistance Load Resistance Load Inductive Load Relay Output Troubleshooting If you have any difficulties using your ZT-20xx-IOG series I/O device, please send the following contents of the problem to service@icpdas.com Description of the problem...