Aaf - ICP DAS USA ZT-2005-C8 User Manual

5.2.13

$AAF

Description
This command is used to read the firmware version of a specified module.
Syntax
$AAF[CHKSUM](CR)
$ Delimiter character.
AA The address of the module to be read in hexadecimal format (01 to FF)
F The command to read the firmware version information
Response
Valid Command
Invalid Command
! Delimiter character to indicate a valid command.
? Delimiter character to indicate an invalid comman.
AA The address of the responding module in hexadecimal format (01 to FF)
(Data) The firmware version of the module as a string value.
There will be no response if the command syntax is incorrect, there is a
communication error, or there is no module with the specified address.
Examples
Command $1BF
Response !1B01.00
Reads the firmware version of module 27 and returns a response indicating that
the command was successful, and showing that the firmware is version 01.00.
ICP DAS, ZT-2005-C8 User Manual, Version v1.0.1
Copyright © 2014 by ICP DAS Co., Ltd. All Rights Reserved.
!AA(Data)[CHKSUM](CR)
?AA[CHKSUM](CR)
Page 31