Field Of Application - Siemens SIPROCESS GA700 Compact Operating Instructions

Introduction

1.4 Field of application

It is not permissible to use this device as a gas warning unit.
Note
Aggregate state of examined substances
The system can only be used for gaseous samples.
Note
This device meets the requirements of NAMUR Recommendation 53.
Note
Use in home environment
This equipment of Class A Group 1 is intended solely for use in industrial areas.
If used in homes, the device may cause radio interference.
Note
For more information on the compatibility of the hardware and firmware, refer to:
Siemens Industry Online Support (https://support.industry.siemens.com/cs/de/en/ps/17731).
You will find more information in the operating instructions, see
"References (Page 107)".
1.4 Field of application
These compact operating instructions describe SIPROCESS GA700 devices approved for
operation in hazardous areas. They refer to the rack-mounted and wall-mounted devices with
installed analyzer modules that are used depending on the measuring task and local conditions.
The following analyzer modules are available for explosion-proof devices:
• Standard analyzer modules OXYMAT 7, ULTRAMAT 7 and CALOMAT 7 for rack-mounted and
wall-mounted devices. Up to two analyzer modules possible per basic device.
• High-temperature analyzer modules OXYMAT 7 and ULTRAMAT 7 only for wall-mounted
devices. Only one analyzer module possible per wall-mounted device.
Note
Special conditions
You must also take into consideration the special conditions described in the following listed
certificates. These conditions relate, in particular, to the following:
• Areas of application
• Requirements for operation in hazardous areas
• Other precautionary measures important for operation
8
Devices in explosion-proof design
Compact Operating Instructions, 01/2022, A5E35134047-11