Datapro Software Interface; Web Server Interface - DTS POWER PRO User Manual

POWER PRO User's Manual

DataPRO Software Interface

The POWER PRO requires DataPRO software version 3.1.x or later.
Basic status information is available through DataPRO. DataPRO also displays a footer button when any POWER PRO is
connected. Use the POWER PRO link to launch the POWER PRO web server interface, where more detailed information
and control options are available.
The POWER PRO connects to the DataPRO software suite through the COM A/COM B communication ports.

Web Server Interface

The POWER PRO comes with a built-in webserver interface which is available by connecting through the Ethernet
COM A / COM B ports and accessing the POWER PRO's IP address in your web browser. From this interface, you can:
• Monitor system status
• Configure network settings
• Enable/Disable output ports
The following sections describe the POWER PRO web interface.
• •
Introduction Specifications
support.dtsweb.com
•
Using the POWER PRO DataPRO Software Interface
•
Care & Handling
27
August 2022
• •
Connectors Support
10400-00210-MAN (Rev. 0)