Usb Accessories - RACOM RAy3-11 User Manual

5.4.3.2. USB accessories

The USB connector is used for management access (not for user data) to the local unit using Ethernet
or WiFi adapter. Only adapters officially recommended by the unit vendor are supported.
Default WiFi IP address of the unit is 172.17.17.17 with DHCP enabled by default allocating IP address
automatically to connected device.
Fig. 5.11: Menu Link settings > Service access > USB accessories
USB info
Status information about device connected via the USB:
• n/a - info not available (HW in USB slot not recognized by FW = probably not officially supplied
accessory), or
• No device - no device plugged in the USB port, or
• List of basic USB module credentials:
• Vendor ID: Product ID
• Manufacturer
• Product
• WiFi/Eth: up/down — only for network device
• MAC — only for network device
IPv4 address
Unit service management address when connecting via USB port.
Netmask
Network mask when connecting via USB port.
© RACOM s.r.o. – RAy3 Microwave Link
Configuration
97