Service Access; Services - RACOM RAy3-11 User Manual

Configuration

5.4.3. Service access

5.4.3.1. Services

Access routes for link configuration.
Fig. 5.10: Menu Link settings > Service access > Services
Service access
IPv4 address
Service IP address, by default 192.168.169.169 for L unit and 192.168.169.170 for U unit. Manage-
ment address of the Peer station has to be set up as well.
Note
Unknown IP address
If you forget the Service IPv4 address, it can be found by reading data broadcast through
LLDP protocol. Data is transmitted every 60 seconds and contains the following information:
1. Management address: IP address
2. System Description: Serial number
3. Chassis Subtype: Unit product type
4. IEEE 802.1 - Port and Protocol VLAN ID: Port and Protocol VLAN Identifier: (e.g. 300
(0x012C)) but only if Management VLAN is enabled
The message can be recorded and converted into a readable form using an LLDP client.
A suitable tool for this purpose is Wireshark IP traffic analyzing tool, with free licenses
available for both Windows and Linux. To locate the message easily, use the Capture filter
"ether proto 0x88cc" in Wireshark.
94 RAy3 Microwave Link – © RACOM s.r.o.