Sizes, Packaging And Labeling - RACOM RAy3-11 User Manual

1.6. Sizes, packaging and labeling

1.6.1. RAy3 unit
• Outer sizes for all RAy3 models are identical:
245×245×160 mm
• Weight:
RAy3-10 2.8 kg (6.2 lbs)
RAy3-11 2.9 kg (6.4 lbs)
RAy3-17 2.6 kg (5.7 lbs)
RAy3-18 2.9 kg (6.4 lbs)
RAy3-24 2.6 kg (5.7 lbs)
RAy3-80 2.8 kg (6.1 lbs)
Basic technical parameters like identification of the HW model, working frequency, maximum RF Output
power, requirements for power supply, most important certifications, etc. are visible on RAy Product
label. All technical parameters are stated in detail in Chapter 9, Technical parameters.
1.6.2. Product label
The label contains identification of the HW model and its serial number, basic technical parameters,
most important certifications, QR code to manual, address of the producer, etc. Meaning of the most
important information listed on the product label is:
• Type – RAy3 product line identification (for details see Section 1.7, "Ordering codes")
• Code – detailed identification of the unit HW (for details see Section 1.7.1, "RAy units")
• S/N – serial number, MW link consists of two separated units with two different serial numbers
• QR code – www link to the latest version of the User manual
• RF Power – maximum output power
• TX, RX freq – range of working frequency
• PoE – power supply characteristics
• CE, FCC ID, IC or other - available certifications
Fig. 1.20: Product label example
Important
The processor included in the unit variant S and X (identified by the item 'Code' on product
label and in the ordering code) uses an encryption module listed as 5A002.a.1 in the Regulation
(EU) 2021/821, setting up a Community regime for the control of exports, transfer, brokering
© RACOM s.r.o. – RAy3 Microwave Link
Product
27