Table of Contents
Advertisement
5. Configuration
Standard RAy3 unit configuration and management are made through its web-based graphical user
interface (GUI). All functions, their parameters, configuration possibilities and options are described
within this chapter.
All functions described in this chapter are also available through the unit CLI interface - for its description
see Chapter 6, Command Line Interface.
5.1. Introduction
5.1.1. Supported web browsers
Supported web browsers for desktops are current versions of:
• Edge
• Chrome
• Firefox
• Safari (for iOS only)
Supported Web browsers for smartphone equipment are current versions of:
• Chrome (for Android only)
• Safari (for iOS only)
Note
For safety reasons, it is recommended to use a web browser without any extensions (especially
extensions, which could get access to data).
5.1.2. Login
You can login into the configuration interface using either the insecure HTTP protocol (default login
screen), or the secure HTTPS protocol. You should select the connection method on the login screen.
If the HTTPS protocol is used, it is not possible to tap the network communication and acquire the
station's login information.
Fig. 5.1: Login
Note
Antenna alignment link below Login window activates smartphone Antenna alignment tool.
See its detailed description in chapter Live data.
© RACOM s.r.o. – RAy3 Microwave Link
Configuration
79
Advertisement
Table of Contents
