Dscp Egress - RACOM RAy3-11 User Manual

5.5.3.5. DSCP egress

Fig. 5.29: Menu Switch settings > QoS > DSCP egress
Port name
Selects the port on Eth switch for which settings below are shown/updated.
Frame priority
Frame priority value for DSCP mapping to which the following Green and Yellow parameters (DSCP
marking and DSCP) belong to.
DSCP marking
When this parameter is enabled for some Frame priority, the Frame Priority Mapping will be used,
i.e. IP frames assigned with this FPRi in ingress will get their DSCP fields updated.
DSCP
This parameter defines the new DSCP value that is assigned to frames that egress this port. The
FPri assigned to the frame in ingress is used to access this table.
© RACOM s.r.o. – RAy3 Microwave Link
Configuration
133