Quick Guide - RACOM RAy3-11 User Manual

Quick guide

1. Delivered items
3. Power supply
Accessing units
- Default IP addresses for Ethernet access:
- Default IP address for USB/WiFi or USB/Eth access:
Ethernet access - set computer IP address within the range 192.168.169.1-255. USB/WiFi or USB/Eth access - IP address
set automatically by DHCP (enabled by default, can be disabled in unit management). Recommended USB adapter must be
plugged in to the unit. Default WiFi setting is without any password (recommended is to set one immediately).
- Web browser access to management:
http://172.17.17.17 (both units, USB/WiFi or USB/Eth)
or http://192.168.169.169 (L unit, Ethernet)
or http://192.168.169.170 (U unit, Ethernet)
Defaults: Username: admin, Password: admin
Secure HTTPS access can be optionally used instead (use „secured version" below main entry to the management and then
accept the https security certificate issued by RACOM).
If the units are linked to each other, the status indicator in management interface states "OK" and status LED lights
green. If not, utilize the antenna alignment (see pict. 10 and Antenna Alignment Tool above).
Configuration and backup of basic parameters
- Set bandwidth, channels, modulation, power, IP addresses (do not use the default ones), Access channels (ssh, https..).
- Change the password, restart both units and check the link status (to verify that the parameters are saved correctly).
- Backup the configuration in the Tools / Maintenance / Backup / Settings menu. Store the backup file to your PC.
© RACOM s.r.o. – RAy3 Microwave Link
2. Accessories
4. Configuration
192.168.169.169/24 (L unit) and 192.168.169.170/24 (U unit)
172.17.17.17/24 (both units)
- Antenna Alignment Tool:
http://172.17.17.17/tk (both units, USB/WiFi or USB/Eth)
or http://192.168.169.169/tk (L unit, Ethernet)
or http://192.168.169.170/tk (U unit, Ethernet)
no Username or Password is required for Tool
Quick guide
9