Ray Tools App For Mobile Devices - RACOM RAy3-11 User Manual

7. RAy Tools app for Mobile devices

RAy Tools is a stand-alone application designed to perform all steps of
establishing a new link and operate it. It is optimised for use on mobile
devices with smaller displays and especially in challenging conditions.
RAy Tools supports the following functions:
○ Link Calculation – to calculate or verify the link budget
○ Antenna Alignment – indicates current RSS and MSE values, optionally
with acoustic indication, for convenient antenna alignment
○ Link Management – standard web-based unit management
Antenna Alignment and Link Management functions require a WiFi con-
nection to the RAy unit. It has to be established by the user before those
2 functions can be used.
RAy WiFi network name is "RAy Code + RAy Serial Number" (for example
"RAy3-24-1234567890"). RAy unit does not provide Internet Access to
the smartphone or tablet, so the user has to accept "No Internet access"
message once a WiFi connection to RAy is established. See Chapter 8,
Troubleshooting if problem with WiFi connection occurs.
Note
WiFi on the RAy unit is active only if RAy WiFi module is present
and its functionality is allowed in RAy management (permanently
or only during air link loss - for WiFi setup see Section 1.4.2,
"Service WiFi - optional (using USB „S")").
Every RAy3 shipped from the factory is equipped by a WiFi
module and the WiFi is allowed with no password (one should
be set immediately by the user).
© RACOM s.r.o. – RAy3 Microwave Link
RAy Tools app for Mobile devices
181