Radio Adaptation - RACOM RAy3-11 User Manual

5.6.1.4. Radio adaptation

Fig. 5.41: Menu Tools > Maintenance > Radio adaptation
Band index
Band index
Band index displays radio channel assignment of local unit transmitter (TX) for L (Lower) or
U (Upper) part of the frequency band.
Change button
Applies only for 17 GHz and 24 GHz links (where hardware of each unit is universal for the
entire frequency band). Change button changes the band index (L -> U and U-> L). If units are
linked together both Local and Peer units are changed in the same time.
Note
Changing band index is allowed only in symmetric mode (i.e. TX bandwidth is the same
as RX bandwidth).
After restoring factory settings Band index is set to its pre-defined state L or U as typed on
Product Label.
Warning
When the radio band index is changed, the "Link settings" menu parameters of each unit
are reset to default values except login / password details.
© RACOM s.r.o. – RAy3 Microwave Link
Configuration
155