5.4.4. Alarms
5.4.4.1. Alarms Status
Fig. 5.14: Menu Link settings > Alarms > Status
Overview of alarms
alarm
warning
cleared / OK
confirmed
All system alarms are listed on this screen. Inactive alarms are colored white with an "OK" text label.
Active alarms are colored according to the severity of the alarm with a text message describing the
measured value status.
For a detailed description of each Alarm see Section 5.4.4.3, "Alarms Config", in unit management just
click on the Alarm name.
© RACOM s.r.o. – RAy3 Microwave Link
Configuration
103