Emerson Micro Motion 5700 Installation Manual page 42

Set up the printer
February 2023
6. Change the PC network settings back to the original settings.
7. Configure the 5700 Ethernet transmitter for the printer.
8. Perform a test print to verify the settings are correct.
42
d) At the login screen, enter:
Default username:
Default password:
The EpsonNet Config utility screen displays.
e) Select TCP/IP under the configuration settings (not the basic settings), listed
on the left side of the screen.
f) Change the IP Address (i.e., 192.168.1.55), Subnet Mask, and Default
Gateway based on your network. Select an IP address that is unique to the
local network.
The printer must be on the same subnet as the 5700.
g) Required: Set Acquiring the IP Address to Manual.
h) Select Send to save your settings.
i) Select Reset, or power cycle the printer when prompted to apply the changes.
Use the windows you used in Step 4.
a) Remove the Ethernet cable from the PC and connect it to the 5700 Ethernet
transmitter.
b) If you have not already done so, configure the transmitter IP address, subnet
mask, and default gateway.
Display
ProLink III
For instructions on how to configure the transmitter and PC Ethernet
settings, see the Micro Motion 5700 with Ethernet Transmitters: Configuration
and Use Manual.
c) Enter the printer IP address you configured in the previous step into the 5700
Ethernet transmitter.
Display
ProLink III
Web browser
Display
ProLink III
Web browser
For instructions on how to configure print ticket options, see the Micro Motion 5700
with Ethernet Transmitters: Configuration and Use Manual.
epson
epson
Menu → Configuration → Ethernet Settings → Network
Settings
Device Tools → Configuration → Network Settings
Menu → Configuration → Printer → Printer IP address
Device Tools → Configuration → Printer and Tickets
Configuration → Printer and Tickets
Menu → Operations → Printer → Print Ticket → Print Test
Page
Device Tools → Configuration → Printer and Tickets
Configuration → Printer and Tickets
Micro Motion 5700 Ethernet Transmitters
Installation Manual
MMI-20029768