Aligning Drive Rolls And Wire Guide - Miller Multimatic 255 Owner's Manual

�
Complete Parts List is available at www.MillerWelds.com
7-4.

Aligning Drive Rolls And Wire Guide

Turn Off Power.
View is from top of drive rolls looking down
with pressure assembly open.
Correct Incorrect
4 1 Drive Roll Securing Nut
3
2 Drive Roll
2
1
3 Wire Guide
4 Welding Wire
5
5 Drive Gear
Insert screwdriver, and turn screw in or out
until drive roll groove lines up with wire
guide.
Close pressure roll assembly.
OM-278174 Page 57