Technical Specification; Device Overview - KERN ALS Series Operating Manual

16.3 Technical specification

Distance
"sample–ion source"
Ozone concentration
Weight
Dimensions [cm]
Ambient conditions
Power adapter
Input voltage
Ionizer
input voltage
Pollution degree
Overvoltage category
Height above see level
for the installation
Installation site

16.4 Device overview

Keyboard overview
1 Active ion source (Continous Mode)
(automatic switch-off in 8 h)
To switch between the two work modes, press one of the two buttons.
84
ca. 5-40 cm
0~0,05 ppm (2 cm from the ion source)
525 g
110 × 105 × 60
0–50°C, air humidity 20–80% (non-condensing)
100–240 VAC, 50/60 Hz
12 VDC, 500 mA
2
Category II
up to 2000 m
Only indoors
2 Active ion source (Time Mode)
(t2-minute work mode)
ALJ/ALS/PLJ/PLS-BA-e-1943