Kia SORENTO HEV 2023 Manual page 95

Safety features of your vehicle
2nd row seat
OMQ4030071
3rd row seat
OMQ4030072
1. Route the seat belt webbing through
the rear seat belt guides. It will help
keep the belts from being trapped
behind or under the seats.
2. After inserting the seat belt, tighten
the belt webbing by pulling it up.
CAUTION
When pulling out to wear the seat belt,
the tongue should be slowly pulled out
of the seat belt guide so that the seat
belt guide does not come off the trim.
Releasing the seat belt:
ODEEV058078NR
僅 The seat belt is released by pressing
the release button (1) on the locking
buckle.
When it is released, the belt should
automatically draw back into the
retractor.
If this does not happen, check the belt
to make sure it is not twisted, then try
again.
Pre-tensioner seat belt
OSP2I039024
Your vehicle is equipped with driver's
and front passenger's Pre-tensioner seat
belts.
The purpose of the pre-tensioner is to
make sure that the seat belts fit tightly
against the occupant's body in certain
collisions.
Seat belts
4
4 25