Kia SORENTO HEV 2023 Manual page 417

Driving your vehicle
the infotainment quick reference
guide.
Detecting sensor
SVM-side view camera
OMQ4PH052459L
(camera located at bottom of the mirror)
Refer to the picture above for the
detailed location of the detecting sen-
sors.
WARNING
The image shown on the cluster may dif-
fer from the actual distance of the
object. Make sure to directly check the
vehicle's surroundings for safety.
CAUTION
If the camera lens is covered with for-
eign material, the Blind-Spot View Moni-
tor may not operate normally. Always
keep the camera lens clean.
However, do not use chemical solvents
such as strong detergents containing
high alkaline or volatile organic solvents
(petrol, acetone etc.). This may damage
the camera lens.
Blind-Spot View Monitor (BVM)
Blind-Spot View Monitor settings
Blind-Spot View
OMQ4AH050340
With the ENGINE START/STOP button in
the ON position, select 'Driver Assistance
→ Blind-Spot Safety → Blind Spot View'
from the Settings menu to turn on Blind-
Spot View Monitor and deselect to turn
off the function.
Blind-Spot View Monitor opera-
tion
Operating conditions
僅 ENGINE START/STOP button is in the
OFF position
僅 Turn signal is ON
Off conditions
僅 ENGINE START/STOP button is in the
OFF position
僅 Turn signal is OFF
僅 Hazard warning flasher is ON
僅 Other warnings pops up and takes
priority over the Blind-Spot View Mon-
itor
6
6 117