Driving your vehicle
ing on a curved road. The function
may recognise a vehicle in the same
lane.
Always pay attention to road and driv-
ing conditions whilst driving.
僅 Driving where the road is merging/
dividing
OMQ4H052618
Blind-Spot Collision-Avoidance Assist
may not operate properly when driv-
ing where the road merges or divides.
The function may not detect the vehi-
cle in the next lane.
Always pay attention to road and driv-
ing conditions whilst driving.
僅 Driving on an inclined road
OMQ4H052619
Blind-Spot Collision-Avoidance Assist
may not operate properly when driv-
ing on a slope. The function may not
detect the vehicle in the next lane or
6
94
Blind-Spot Collision-Avoidance Assist (BCA)
may incorrectly detect the ground or
structure.
Always pay attention to road and driv-
ing conditions whilst driving.
僅 Driving where the heights of the lanes
are different
OMQ4H052620
Blind-Spot Collision-Avoidance Assist
may not operate properly when driv-
ing where the heights of the lanes are
different. The function may not detect
the vehicle on a road with different
lane heights (underpass joining sec-
tion, grade separated intersections,
etc.).
Always pay attention to road and driv-
ing conditions whilst driving.
WARNING
僅 When you are towing a trailer or
another vehicle, make sure that you
turn off Blind-Spot Collision-Avoid-
ance Assist.
僅 Blind-Spot Collision-Avoidance Assist
may not operate normally if interfered
by strong electromagnetic waves.
僅 Blind-Spot Collision-Avoidance Assist
may not operate for approximately 15
seconds after the vehicle is started, or
the front view camera or rear corner
radars are initialised.