Kia SORENTO HEV 2023 Manual page 531

What to do in an emergency
4. Unscrew the valve cap from the valve
of the defective tyre and screw the fill-
ing hose of the sealant bottle onto the
tyre valve.
OMQ4H060007
CAUTION
Securely install the sealant filling hose to
the valve. If not, sealant may flow back-
ward, possibly clogging the filling hose.
5. Ensure that the compressor is
switched off, position 0.
6. Connect between compressor and the
vehicle power outlet using the cable
and connectors.
OMQ4040076L
7. Make the ENGINE START/STOP but-
ton position on or ignition switch posi-
tion on.
8. Switch on the compressor and let it
run for approximately 5 ~ 7 minutes
If you have a flat tyre (with tyre mobility kit)
to fill the sealant up to proper pres-
sure. (refer to "Tyres and wheels" on
page 8-41). The inflation pressure of
the tyre after filling is unimportant
and will be checked/corrected later.
Be careful not to overinflate the tyre
and stay away from the tyre when fill-
ing it. When the tyre and wheel are
damaged, do not use Tyre Mobility Kit
for your safety.
WARNING
If the tyre pressure is below
26psi(180kPa), do not drive the vehicle.
The tyre may cause accident.
9. Switch off the compressor.
10.Detach the sealant feeling hoses from
the sealant bottle connector and from
the tyre valve. After using, leave the
sealant bottle and the compressor
attached together.
Return the TMK to its storage location in
the vehicle.
WARNING
Carbon monoxide
Do not leave your vehicle running in a
poorly ventilated area for extended peri-
ods of time. Carbon monoxide poisoning
and suffocation can occur.
7
7 27