Maintenance
Conventional type (if equipped)
1. Raise the wiper arm.
2. Lift up the wiper blade clip. Then pull
down the blade assembly and remove
it.
OCDW049467R
3. Install the new blade assembly.
OCDW049468R
4. Return the wiper arm on the wind-
screen.
5. Turn the ignition switch or ENGINE
START/STOP button to the ON posi-
tion and wiper arms will return to the
normal operating position.
8
36
Aero type (if equipped)
1. Raise the wiper arm.
2. Push the button of wiper blade clip.
Lift up the wiper blade. Then pull up
the blade assembly and remove it.
OMQ4PH070028L
3. Install the new blade assembly.
OMQ4PH070029L
4. Return the wiper arm on the wind-
screen.
5. Turn the ignition switch or ENGINE
START/STOP button to the ON posi-
tion and wiper arms will return to the
normal operating position.
Wiper blades