Table of Contents
Advertisement
Pro‐OX Iron Filter 1650 with Chlorine Side Tank Installa on & Startup Guide
17. PROGRAMMING:
a. First, press the menu bu on labeled " " once. If it says "SCREEN LOCKED," you may have to
press and hold the upper le bu on labeled " " about 3 seconds un l a beep sounds to unlock
the display screen.
b. NOTE: Use the up and down arrows to cycle
change any se ng, press " " . When the display flashes, the value may be changed. Press ei-
ther the up or down arrow to change the value. Press " " once more to accept the value, and
the display should
c. Step 1: REGIONAL US GAL—this stands for US gal-
to US GAL. When it is set, press the down bu on to proceed.
d. Step 2: The display should be set to CALENDAR CLOCK. By default, the system is most likely set
to METER IMMEDIATE or METER DELAYED. We recommend CALENDAR CLOCK for the opera-
on of your iron filter, to backwash a er a set number of days. Change the se ng, then press
the down arrow to proceed. It is ok to set it to backwash every 600 to 1200 gallons, but we also
recommend every 3 – 4 days as well, or a 3 – 4 day over-ride, depending on usage.
e. Step 3: TIME—set the me of day and press the down bu on to proceed.
f. Step 4: REG. TIME—set to 2:00 AM or some other me when no water is being used and no
other filter or so ener is likely to be in a regenera on cycle. Press the down bu on to proceed.
g. Step 5: REG. DAYS—this tells the iron filter to how o en to regenerate, in days. It can be set for
anywhere from 1 to 10 days, with 7 being the commonly recommended se ng. If you are hav-
ing problems with bleed-through of iron a er your filter has been running for a few days,
change this se ng to 2 or 3 days.
h. Step 6: BACKWASH—stands for backwash length in minutes. It should be set to 10 MIN, which
means 10 minutes of backwash. If your water is extremely high in iron you can change this
se ng to 12 or 14 minutes to allow some extra backwash me. Generally, though, 10 minutes
is a good se ng. Press the down bu on again to proceed.
Page 11
stop flashing to indicate that the se ng has been saved.
www.cleanwaterstore.com
through the various program se ngs. To
lons format; if it is different, change it
Rev 080814
Advertisement
Table of Contents
Need help?
Do you have a question about the Pro-OX Iron Filter 1650 with Chlorine and is the answer not in the manual?