Table of Contents
Advertisement
Chapter 3
USB Keyboard Support
Enable USB Keyboard Support for DOS and Windows 95. Settings: Enabled and
Disabled.
SuperIO Device
Press <Enter> to enter the sub-menu and the following screen appears:
Onboard FDC Controller
Enable the onboard floppy controller. Select "Enabled" when you have installed a
floppy disk drive. Settings: Enabled and Disabled.
Onboard Serial Port 1/2
Set the base I/O port address and IRQ for the onboard serial port A/serial port B.
Selecting Auto allows BIOS to automatically determine the correct base I/O port
address. Settings: Disabled, 3F8/IRQ4, 2F8/IRQ3, 3E8/IRQ4, 2E8/IRQ3 and Auto.
Serial 2 Mode Select
The field specifies the operation mode for serial port "COM B". If the mode
selected is not "Serial Port" then "COM B" will be disabled in order for other device
to take effect. Settings are:
Serial Port:
IrDA(Infrared):
ASKIR(Infrared):
SmartCard Reader: SmartCard Reader
RS-232C Serial Port
IrDA-compliant Serial Infrared Port
Amplitude Shift Keyed Infrared Port
3-14
Advertisement
Table of Contents
