ADJ ELEMENT H6 PAK User Manual page 9

S A F E T Y G U I D E L I N E S
FLIGHT CASE LID
When opening the flight case, the lid must be locked in place manually. The lid support prop is located
on the right-hand side of the flight case, near the power cable storage compartment. The lower end of
the prop is fixed to the flight case, and the free upper end contains a cut-out groove.
Once the lid has been opened, lift the upper end of the support bar and attach it to the recessed catch
on the underside of the lid, along the right-hand side. Make sure that the catch is fully seated in the
support bar's groove before reaching into the flight case.
FAILURE TO PROPERLY FOLLOW THIS PROCEDURE CAN RESULT IN PERSONAL INJURY OR
DAMAGE TO THE DEVICE, AS THE LID MAY SWING SHUT WITHOUT WARNING!
See the illustration below for reference.
9