ADJ ELEMENT H6 PAK User Manual page 16

I N S T A L L A T I O N
CLAMP INSTALLATION
The Element H6 IP features a mounting clamp attachment point on the side of the device, as well as
an eyelet for safety cable at the bottom of one foot (see the illustration below). When mounting the
fixture to a truss or any other suspended or overhead installation, be sure to secure appropriately
rated clamps (not included) to the clamp attachment point, as well as an appropriately rated safety
clamp.
SAFETY CABLE
MOUNTING CLAMP
EYELET
ATTACHMENT
SAFETY CABLE:
ALWAYS ATTACH A SAFETY CABLE WHENEVER INSTALLING THIS FIX-
TURE IN A SUSPENDED ENVIRONMENT TO ENSURE THAT THE FIXTURE
WILL NOT FALL IF THE CLAMP FAILS.
RIGGING
Overhead rigging requires extensive experience, including but not limited to: calculating working load
limits, understanding the installation material being used, and periodic safety inspection of all installa-
tion material and the fixture itself. If you lack these qualifications, do not attempt to perform the instal-
lation yourself. Improper installation can result in bodily injury.
16