Separator Element Replacement - Sullair 185CFM User Manual

185 T4F Kubota User Manual
1
1. Fluid filter
2. Compressor unit
3. Thermal valve manifold
1
Fluid filter replacement P/N: 250028-032
Figure 6-1: Compressor fluid filter
2. Remove the primary and optional safety ele-
ments.
3. Clean the body, inside and out, with a damp
cloth.
4. Reinstall (if clean) or replace the safety ele-
ment if installed.
5. Replace the new primary filter element.
6. Reposition the cover and lock it into the position.
7. Reset the filter restriction indicator (if
equipped).
Element inspection
1. Insert a bright light source into the element
and look for any light leaks which indicate
the presence of damage (holes, cracks, etc.)
2. Inspect all gaskets and gasket contact sur-
faces of the housing and replace any dam-
aged ones.
02250216-781 R02
Subject to EAR, ECCN EAR99 and related export control restrictions.
1. Filter body
2. Filter cover
3. Primary element
4. Safety element (optional)
1
Air filter primary element replacement P/N: 02250102-158
2
Air filter safety element replacement P/N: 02250102-160
Figure 6-2: Air filter
3. Store clean elements for later use in a clean
container.
4. After installing the element, inspect and
tighten all air inlet connections before operat-
ing the compressor.
6.9.4

Separator element replacement

Refer to Figure 6-3. When compressor fluid carryover is
evident, after replacing or inspecting the fluid return line
strainer and orifice, and the blowdown valve; and all are
in satisfactory condition, the separator element must be
replaced with kit number 250034-112 (element for air/
fluid separator).
6: Maintenance
1
2
47