INSTRUCTIONS FOR
1431 Door Closer with Hold Open Arms
1431 SERIES ADJUSTABLE FROM SIZE 1 THRU 6
FOR INSTALLATION ASSISTANCE CALL SARGENT AT 1-800-727-5477 / www.sargentlock.com
IMPORTANT NOTICE
PRE-DRILL 3/32" HOLES FOR SELF-TAPPING SCREWS
OR TAP #12-24 FOR MACHINE SCREWS
Installation Instructions based on Application and Arm type
+
or
Standard Mounting Application -
H arm
For Standard Application - the Door Closer is mounted
on the hinge side of door (see page 2)
Parallel Arm Application -
PH9 Arm
For Parallel Arm Application - the Door Closer is mounted
on the stop side of door (see page 4)
Top Jamb Application -
H, HZ & HZA Arm
For Top Jamb Application - the Door Closer is mounted on the
frame on the stop side of the door (see page 6)
LEFT
HAND DOOR
HINGE SIDE
STOP SIDE
Copyright © 2010, Sargent Manufacturing Company, an ASSA ABLOY Group company.
All rights reserved. Reproduction in whole or in part without the express written permission
of Sargent Manufacturing Company is prohibited.
RIGHT
HAND DOOR
HINGE SIDE
STOP SIDE
A7140F
1
1