Advertisement
INSTRUCTIONS FOR INSTALLING PARALLEL ARM APPLICATION
C
Select degree of door opening required and attach door closer body to door (long end toward hinge) and foot bracket to frame (according to
illustration on "A" page 3). Use templates enclosed for special arms.
Mount hold open arm to bracket with adjusting screw facing down for left hand door, facing up for right hand door.
LEFT HAND
DOOR SHOWN
D
D1) Install main arm on the closer with the index mark on
spindle aligned with the number on the arm
Note: Left Hand Doors -align index mark with the # 4
on the main arm (as shown)
Note: Right Hand Doors -align index mark with the # 5
on the main arm (as shown)
D2) This requires the spindle to be rotated
D3) Rotate the spindle on the bottom of the closer to align
index mark with the required number on the arm
45°
E
E1) Opening the door slightly, slide rod into swivel arm and
then close the door.
E2) With the door in the closed position, swivel the arm so that
the pivot is an 1-1/2" off the door surface (as shown below)
E3) Tighten the arm screw securely
F
Adjust closer as required. See page 8 for details.
ACCESSORIES INFORMATION
NUT FACES DOWN
45°
2 1/2" MIN.
1430-D DROP BRACKET
CLOSER IS MOUNTED ON PLATE WHEN
TOP RAIL IS TOO NARROW
NUT FACES UP
LEFT HAND DOOR
FOOT BRACKET
LEFT HAND DOOR
FOOT BRACKET
1430-J COVER PLATE
May be used when closer is mounted on
a narrow rail to improve appearance when
closer is viewed through glass
MORTISE NUTS FOR BOLTING THRU THE DOOR
ARE FURNISHED WHEN ORDERED
Copyright © 2010, Sargent Manufacturing Company, an ASSA ABLOY Group company.
All rights reserved. Reproduction in whole or in part without the express written permission
of Sargent Manufacturing Company is prohibited.
CLOSER MOUNTED ON
STOP SIDE OF DOOR
RIGHT HAND
DOOR SHOWN
PRELOAD 45°
ROD
ARM
SCREW
HOLD
OPEN ARM
PRELOAD 45°
ROD
ARM
SCREW
HOLD
OPEN ARM
#H8 MORTISE FOOT
#8 MORTISE FOOT
For use where the
standard surface applied
foot cannot be attached
to the top casing or where
appearance is a major
factor
1-1/2"
5
A7140F
Advertisement
