General Accessories; Safety Accessories; Troubleshooting - Assa Abloy Besam SW200i User Manual

General accessories

Your Besam SW200i can be further improved with the following add-ons (please contact your local
ASSA ABLOY Entrance Systems dealer for detailed description).
Position switch
4
Electrical lock , see page 9
10
Key switch , see page 9
11
Elbow switch , see page 9
11
Radar , see page 9
12
Wireless transmitters (not illustrated)
Access control (not illustrated)
Door stop (not illustrated)

Safety accessories

Even though the Besam SW200i is installed to comply with all applicable safety regulations, it is
possible to enhance safety/comfort with the following add-ons (please contact your local ASSA
ABLOY Entrance Systems company for detailed description).
Safety sensors , see page 9.
13
Finger protection

Troubleshooting

What´s wrong?
The door does not open
The motor does not start
The motor starts but door(s)
will not open
The door does not close
The door opens and closes
continuously
If the problem continues, please contact your ASSA ABLOY Entrance Systems representative.
1009729-EI-2.0
, see page 9
, see page 9.
9
Remedies
Change the setting of the program selector.
(See page 6).
Check that there are no objects in the detection zone if a sensor is
fitted.
Check the mains switch and fuse in the building.
Unlock the mechanical locks.
Check that nothing is jammed beneath the door.
Change the setting of the program selector.
(See page 6).
Check that there are no objects in the detection zone if a sensor is
fitted.
Check that nothing is jammed beneath the door.
Check that there are no moving objects within 1-1.5 m (39"-59")
from the door if an automatic activation unit is fitted.
Issue 2013-12-18 11