Advertisement
D
D1) Install main arm on the closer with the index mark on spindle aligned with the number on the arm
Note: Left Hand Doors -align index mark with the # 3 on the main arm (as shown)
Note: Right Hand Doors -align index mark with the # 1 on the main arm (as shown)
POSITION
OF MAIN ARM
WHEN
ASSEMBLING
TO SPINDLE
E
Attach hold open foot to frame with adjusting nut facing down for left hand door or up for right hand door as illustrated below.
NUT FACES UP
RIGHT HAND
DOOR SHOWN
F
F1) Opening the door slightly, slide rod into swivel
arm and then close the door
F2) With the door closed, position the main arm so
it is at 90º to the door surface
F3) Tighten the arm screw securely
G
Adjust closer as required. See page 8 for details.
INSTRUCTIONS FOR INSTALLING TOP JAMB
LEFT HAND DOOR
FRAME
POSITION OF
MAIN ARM WHEN
ASSEMBLING
TO SPINDLE
LEFT HAND
NUT FACES DOWN
LEFT HAND
DOOR SHOWN
LEFT HAND DOOR
RIGHT
ANGLE
Copyright © 2010, Sargent Manufacturing Company, an ASSA ABLOY Group company.
All rights reserved. Reproduction in whole or in part without the express written permission
of Sargent Manufacturing Company is prohibited.
CLOSER MOUNTED ON FRAME
ABOVE STOP SIDE OF DOOR
RIGHT HAND
INDEX MARK
45°
ON SPINDLE
INDEX MARK
ON SPINDLE
FRAME
ARM
SCREW
HOLD
OPEN ARM
ROD
7
A7140F
Advertisement
