Storing The Pager Display Number - Panasonic KX-TG2000B Operating Instructions Manual

Storing the Pager Display Number

After storing one of the unit's phone numbers, you can check that pager
number is stored correctly. This phone number will be displayed on your
pager if the message is received from an area which does not provide a
caller ID service or a caller requests not to show his/her information.
1
Press
(FUNCTION)
2
Press or
points to "Pager setting",
and press H.
3
Press or
points to "Pager display #",
and press H.
• "Enter display #" is displayed.
• If the number has already been
stored, it will be displayed .
4
Enter the phone number, up to
11 digits.
E n t e r d i s p l a y # :
2 2 2 3 3 3 4 4 4 4
E N T E R = S a v e
• If you misdial, press
Digits are erased from the right. To
erase all the digits, press and hold
.
(CLEAR)
5
Press
(ENTER)
• A beep sounds.
• To return to the standby mode,
press (EXIT).
.
until the arrow
until the arrow
.
(CLEAR)
.
To check the stored pager
number and pager display
number
1. Press
(FUNCTION)
"Pager setting" by pressing
, and press H.
or
2. Select "Calling pager" by
pressing or
3. If using the base unit, press
(DIGITAL!SP-PHONE)
OR
If using the cordless handset,
press .
(TALK)
• The pager number is dialed.
• The pager beeps, and displays the
pager display number followed by
"11"*. If not, store the pager
number and pager display number
again.
• Other users can let you know when
they want you to call back, by
following the procedure above.
*What "11" means:
When your unit alerts your pager after
receiving a message in the mailbox,
"11" will be displayed after the caller's
telephone number.
, and select
, and press H.
.
83