Other Programmable Settings; Setting The Auto Talk Feature; Handset; Selecting The Ringer Pattern - Panasonic KX-TG2000B Operating Instructions Manual

Other Programmable Settings

Setting the Auto Talk Feature

The Auto Talk feature allows you to answer a call by lifting the cordless
handset off the charger without pressing
information on the display after lifting the handset, turn this feature OFF.
Your phone comes from the factory set to ON.
Make sure that the cordless handset is in the standby mode.
1
Press
(FUNCTION)
2
Press
points to "Talk selection",
and press H.
3
Press
points to "Auto talk", and
press H.
• The current setting is displayed.

Selecting the Ringer Pattern

You can select the desired ringer patterns of the base unit and cordless
handsets. 4 patterns are available for each line. Your phone comes from
the factory set to pattern 1. Programming must be carried out
separately for the base unit and cordless handset(s).
Make sure that the base unit/cordless handset is in the standby mode.
1
Press
(FUNCTION)
2
Press
points to "Ringer setting",
and press H.
3
Press
points to "Ringer pattern",
and press H.
• The current settings are displayed.
R i n g e r p a t t e r n
L i n e 1
1
48
.
or until the arrow
or until the arrow
Auto talk
:On
∨∧
ENTER=Save
.
or until the arrow
or until the arrow
L i n e 2
1

Handset

. To view caller's
(TALK)
4
Select "Off" or "On by pressing
or .
5
Press
(ENTER)
• A beep sounds.
• To return to the standby mode,
press (EXIT).
• To answer a call when the Auto Talk
feature is OFF, lift the handset off the
charger, and press (TALK) or the
relevant line button.

Base Unit Handset

4
Enter the desired pattern using
the dialing buttons (
each line. To move to the other
line, press H or I.
• Each time you select a pattern, it
rings.
5
Press
(ENTER)
• A beep sounds.
• To return to the standby mode,
press (EXIT).
.
to ) for
(1) (4)
.