Programmable Settings
Programming Guidelines
This unit has various programmable functions. Most of them are selected
from the function menu on the display (p. 24).
How to select a function item from the menu
1. Press
(FUNCTION)
displayed.
2. You can scroll through the menu by
pressing
item and point the arrow to the item
by pressing
3. Press H to select the item.
4. If the selected item has a sub-menu, it will be displayed. Select the sub-
menu item by pressing
5. You can then select the desired setting.
•
(ENTER)
6. When programming is complete, a confirmation tone sounds. The
display will return to the main menu or the sub-menu (if the function item
is in the sub-menu). You can continue programming other items. To
return to the standby mode, press
Useful information:
• You can go back to the previous display by pressing I except when entering
characters or numbers. To return to the main menu from the sub-menu, press I.
• You can exit the programming mode any time by pressing
• If you do not press any buttons for 60 seconds, the unit will return to the standby
mode.
• If the unit detects a problem, an error message will be displayed (p. 92).
18
(ENTER)
(FUNCTION)
Navigator Key
, I, H)
(
,
while in the standby mode. The main menu is
or
. Find the desired
or
.
is used to select or save a programming setting.
Base Unit Handset
(EXIT)
Base Unit
Ex. "Ringer setting" is at the arrow.
H R i n g e r s e t t i n g
, and press H.
or
.
(EXIT)
Navigator Key
(
(ENTER)
(FUNCTION/EXIT)
S a v e d i r e c t o r y
D a t e a n d t i m e
.
(EXIT)
, I, H)
,