Clearing Settings; Base Unit Handset - Panasonic KX-TG2000B Operating Instructions Manual

Clearing Settings

With the base unit
The following settings of the base unit and the registered cordless
handsets will return to the factory preset.
Function
Base unit ringer volume HIGH
Base unit ringer pattern
Ring group
Base unit Incoming
call tone
Dialing mode
Flash time
Call restriction
Base unit line selection
Line mode
General delivery
mailbox password
Personal mailbox
password
Make sure that the base unit is in the standby mode.
1
Press
(FUNCTION)
2
Press or
points to "Initialization",
and press H.
3
While "Function" is at the
arrow, press H.
With the cordless handset
The following settings of the
cordless handset will return to the
factory preset.
Function
Ringer volume
Ringer pattern
Incoming call tone
Line selection
Auto talk
Make sure that the cordless
handset is in the standby mode.
Factory preset
Pattern 1
All extensions ring
OFF
Tone
700 ms
OFF
AUTO
A mode
0000
1111–8888
(see page 57)
.
until the arrow
Factory preset
HIGH
Pattern 1
ON
AUTO
ON

Base Unit Handset

Function
Direct HS. Access
Call monitoring
Message menu
Recording mode
Auto message delete OFF
Pager number
Pager on/off
Pager display No.
PIN for registration
Auto Attendant System OFF
Answering System
Line 1 & 2 greetings Pre-recorded greeting
Number of rings
Handset answer mode OFF
4
Press
(CLEAR)
• A beep sounds and "Clear" is
displayed.
• To return to the standby mode,
press (EXIT).
1
Press
(FUNCTION)
2
Press or
points to "Initialization",
and press H.
3
While "Function" is at the
arrow, press H.
4
Press
(CLEAR)
• A beep sounds and "Clear" is
displayed.
• To return to the standby mode,
press (EXIT).
Factory preset
ON
ON
ON
High quality
Clear
OFF
Clear
Clear
OFF
Toll Saver
.
.
until the arrow
.
89