Panasonic KX-TG2000B Operating Instructions Manual page 69

Command Menu:
If you do not press
messages or all messages, the Command Menu will be announced and
displayed:
"To play all messages, press 1.
To deliver a message, press 2. (p. 74)"
During playback
To repeat a
message
To skip a message
To stop operation
To adjust the speaker volume (8 levels):
Press during playback.
or
• Each time you press
level will change.
Flash Memory Message Backup
Messages are stored indefinitely on a "flash memory" IC chip and will
not be affected by power failures. All messages are saved until you
erase them.
For Caller ID service users
During playback, the display shows the
name and/or number of the caller whose
message is being played.
To call back the displayed number:
During playback, lift the handset or press
• You can press a line button instead of pressing
• The unit stops playback and automatically dials the displayed phone number.
in step 3 on page 68, after listening to new
or I. (If you press within 5 seconds of
Press
(1)
playback, the previous message will be played.)
or H. (The next message is played.)
Press
(2)
Press .
(STOP)
• To resume playback, press (STOP).
• If you do not press any button for 60 seconds, the
unit will return to the standby mode.
or , the volume
(p. 40)
1 = P l a y a l l m s g .
2 = D e l i v e r m s g .
= E n d
Ex. Level 8
L o u d
L o w
J A C K S M I T H
1 - 2 3 4 - 5 6 7 - 8 9 0 1
- - - M e s s a g e
(DIGITAL!SP-PHONE)
(DIGITAL!SP-PHONE)
H i g h
3 - - -
.
.
69